I-Aluminiyam ye-EPS yokubumba i-foam yokupakisha imveliso yebhokisi
Iimveliso Intshayelelo
Sineqela elinobuchule kunye nelona linamava lokuyila nokuvelisa iimolds ze-EPS.
Inkqubo yokuvelisa umngundo ngolu hlobo lulandelayo 1. uyila ukungunda ngokwemveliso yomthengi umzobo okanye iisampulu.2. Thumela umzobo wokubumba kumthengi ukuze uqinisekise umthengi.3. Velisa ukungunda.4. Vavanya iimbumba ukwenza iimveliso.5. Thumela iisampulu kubathengi uqinisekise.6. Lungiselela ukuthunyelwa kwempahla.
I-mold yonke iphathwa ngokupheleleyo ngumatshini we-CNC ukuqinisekisa ukuba umehluko wobungakanani obungaphantsi kwe-0.1mm.
Umngundo oqatywe ngeTeflon ukwenza ngcono idemould kunye nokungunda kusebenza kakuhle kubushushu obuphezulu.
Umngundo usebenzisa umgangatho ophezulu we-6063 aluminium.
Ngoyilo olukhethekileyo lokugcina umphunga kunye nokusebenza ngokufanelekileyo.
Sinokuyila naluphi na uhlobo lokubumba i-EPS ngokwemfuno yomthengi.Ngabathengi kuphela abaphumeleleyo, sinokuphumelela.
Eyona nto iluncedo
1. I-EPS yokubumba yenziwe ngezinto eziphezulu ze-aluminium, kunye nesakhelo sokubumba senziwe ngeprofayili ye-aluminium ekhutshweyo, eqinile kwaye ihlala ixesha elide.
2. I-EPS mold icutshungulwa ngoomatshini be-CNC, ubukhulu be-mold buchanekile.
3. Sinolawulo olungqongqo lwekhwalithi kuwo onke amanyathelo: i-pattering, i-casting, i-machining, i-assembling, i-Teflon yokugqoka njl.
4. Singakwazi ukuhambisa iimbumba ze-aluminium ngokukhawuleza, uvavanyo lwee-EPS kunye nokukhangela iisampuli ngononophelo ngaphambi kokunikezelwa;
5. Injineli yethu inamava atyebileyo okwenza uyilo.Sinokuyila naziphi na iimbumba ezinzima kubaxhasi.Okufana nokungunda kwebhokisi yeziqhamo ye-EPS, ukungunda kwe-cornice ye-EPS, ukungunda kwebhokisi yeentlanzi ze-EPS, ukungunda kwebhloko ye-EPS ICF, i-EPS seeding tray mold, zonke iintlobo zeemveliso zombane ze-EPS zokupakisha njl.
6. Singakwazi ukuguqula iisampulu zabathengi kumzobo weCAD okanye imidwebo ye-3D.
Usetyenziso
